Best clear gp wet resistant silicone sealant
Product Details
ApplicationIt is multipurpose acetic silicone sealant, it is suitable for sealing, gap filling, waterproofing, used for adhesion for glass,aluminium, stainless steel, ceramic, wood and other most construction materials. It is not used for structural assemble construction and marble, cement etc.Features1. Easy to use, fast cure. Excellent weatherproof, anti-aging. Excellent adhesion for most substrate.
2. Tack free time 10~20min, full dry time 24hours below 23℃, it will reach to the best condition 7 days later.Instruction1. Keep the substrate surface clean, dry, no contaminant.
2. Apply the sealant in a continuous operation with certain pressure by caulking gun to ensure sufficient sealant closely contact the substrate surface.
3. It is the responsibility of the user to do compatibility and adhesion test before using.StorageWhen stored at dry and below 27℃ in unopened container the shelf life is 12 months.PackingCartridge: 300ml, 24 cartridges/carton
Sausage: 590ml, 20 sausages/cartonSausage: 590ml, 20 sausages/cartonColorWhite, Black, Grey, Clear etc.
Technical Data
| Item | Technical Data |
| 1 | Appearance | Paste |
| 2 | Density g/cm3 | 1.34±0.02 |
| 3 | Tack free time/ h | ≤2 |
| 4 | Flow, Sag or Slump | Vertical Deposited, mm | ≤1 |
| Level Deposited | No Distortion |
| 5 | Extrusion / ml/min | ≥260 |
| 6 | Elastic Recovery % | ≥90 |
| 7 | Hardness/Shore A | 32~38 |
| 8 | Ultimate Tensile Strength /Mpa | >0.4 or >0.6 | ≥0.43 |
| 9 | Tensile properties at maintained extension | No Destroy |
| 10 | Cold extension-heat compression | No Destroy |
| 11 | Cohesion property after immersion in water | No Destroy |
| 12 | Tensile properties at maintained extension after ultraviolet | No Destroy |
As cured after 28 days at 23±2℃, RH50±5%
|
Company introduction
Poduction Process
Packaging Logistics
FAQ
Q: What is the minimum order quantity?A: 500cartons for OEM, 200cartons for our brand.Q: What is delivery time?A: About 15 days depend on quantity required after deposit. Except public holidays.Q: How can you guarantee the quality?A: We have rigorous quality test system, from raw materials to finished products, the materials must beinspected and signed by QC staff.Q: How long can I get a quote?A: The quotation could be provided within 24 hours once we know all detailed requirements.Q: Can I get a sample?A: Yes free samples are available. Delivery cost is to be paid by clients.Q: Can you provide OEM service?A: Yes, we can produce under your own brand name. Logo and packing design need to be provided so as to make customized brand name.
