Interior Concrete Wall Sealer Product Description
TP660 is one-component, moisture curable polyurethane sealant. Good sealing and flexible performance. No corrosion and pollution to base materials and environment-friendly. Pricking resistance, easy for repairing. Good bonding with cement and stone.
Interior Concrete Wall Sealer Packing
Packing | Color | Quantity/Carton |
600ml | White, Black, Grey etc. | 20 sausages |
310ml | White, Black, Grey etc. | 25 cartridges |
Interior Concrete Wall Sealer Technical Data
Appearance | Homogeneous Paste |
Sagging properties | 0 mm |
Tack free time | 2 h |
Volatile content | 3% |
Tensile Strength | 2.2MPa |
Elongation at break (%) | 600 |
Tensile modulus | 23℃: 0.5MPa |
| -20℃: 0.7MPa |
Elastic recovery rate | 85% |
Application Temperature | -40℃-90℃ |
Interior Concrete Wall Sealer Special Characteristics
- One-component, excellent extrusion, no sag, easy construction.
- High modulus, good resistance to water pressure.
Interior Concrete Wall Sealer Typical application
Suitable for areas where low movement, high resistance to penetration and pressure are required. For water proofing of air face on bridges, tunnels and drainage pipe. For precast panel, concrete internal wall and stone bonding and sealing.
Interior Concrete Wall Sealer Safety & Storage
- 9 months stored at dry below 25℃ unopened in original containers.
- Keep away from children.
- Avoid contacting with skin and eye. For skin contacted, remove the sealant by cloth, wash skin thoroughly with soap and water. For eye contacted, hold eyelids apart and flush thoroughly with water, contact physician.