Product Description
TP703 is a single-component PU sealant. It can be widely used in car body metal bonding. After curing, it provides a permanently elastic bond to fasten materials with the framework of car. It's water-proof age-resistance, solf and good bonding performance.
Packing
| Packing | Color | Quantity/Carton |
| 600ml | White,Black,Grey etc. | 20 sausages |
| 310ml | White,Black,Grey etc. | 25 aluminum cartridges |
Technical Data
| Appearance | Paste |
Specific gravity |
1.3KG/L |
| Sagging | <3mm |
| Skinning time | Wet solidification |
| Surface dry time | <60mins |
| Curing rate | 3mm/24h |
| Hardness,Shore A | 40 |
| Tensile Strength | 2.0 Mpa |
| Elongation at break | >400%
|
| Tear Strength | 11N/mm |
| Service Temperature Range | -40℃+80℃ |
| Application in short time(at most 8 hours) | 120℃ |
Correction factor | 10% of the width of the joints. |
Special Characteristics
● Neutral, no pollution and curing under normal temperature.
● Excellent durability.
● High abrasion resistance and tear strength.
● Good weathering and water resistance.
● Good slump resistance, non-sag.
● Apply directly on site, no need mix.
● Can be painted, good compatibility with paints.
● No corrosion.
Typicalapplication
● Seal for weld joint of autos and machines.
● Seal for joints of containers and shelters.
● Seal and water proofing for joints of van vehicles.
● Seal for bus air-condition during installing.
● As an adhesive for metal plate of the autos.
Storage
12 months stored at dry below 25℃ unopened in original containers