What are the precautions for laying floor adhesive?

When laying the floor, the floor adhesive plays a very critical role. At the same time, laying the floor adhesive also requires certain professional skills.

Therefore, before laying, you must understand some relevant knowledge about floor adhesive laying.

So how to lay the floor adhesive? What are the precautions for laying floor adhesive? Let's take a look together!

How to lay wood floor adhesive?

1. Measure the size

Measure the size and cut it according to the size. Note that the cut size should be larger than the measured size.

2. Indoor treatment

Before paving, the ground should be cleaned up, the uneven ground should be leveled, then leveled with sandpaper, and then paving should be prepared.

3. adhesive

When applying adhesive, apply adhesive on the floor according to the size of the floor leather, one by one, if there is a gap, you can leave 10 cm unpainted, so as to facilitate the seam behind.

4. Laying floor adhesive

After the adhesive is applied, it can be paved and pressed while paving. For the gaps in the floor, it can be collaged by overlapping. Generally, it is better to overlap 5cm. The remaining adhesive squeezed out of the seams should be wiped clean to avoid affecting the appearance. Apply a thin layer of joint fluid along the joint.

5. Inspection work

Finally, check whether there are air bubbles. If there are air bubbles, you can use a syringe to insert and suck out the air, then compact it, and then use washing powder to clean up the residual adhesive marks on the floor. If it cannot be cleaned, you can wipe it with alcohol until it is clean.

What are the precautions for laying floor adhesive?

1. Adjust the color difference of the floor, place the floor with the same pattern and tone in the living room and aisle, and place the floor with a slight difference under the furniture, so as to achieve the overall aesthetic coordination.

2. When laying floor adhesive, an expansion joint of more than 8mm should be reserved between the floor and the wall. For the space between the solid wood floor and the plywood, it is forbidden to apply any adhesive. For relatively dry areas, it is better for the floor to be naturally compact.

3. When laying floor adhesive, professional nails can be used instead of steam nails, because solid wood flooring is a natural material, and the climate, temperature and humidity are different across the country, and the construction methods are also different. It is best to ask professionals for construction.