How to use wood flooring adhesive for wood floor installation?-

Advantages of using wood flooring adhesive to fully pave the floor:

1. Strong adhesion, ensuring that the wood floor is not easily deformed due to shrinkage and swelling.

2. Moisture-proof and mildew-proof, our wood flooring adhesive uses MS modified silane polyether polymer raw material, which almost completely blocks ground moisture.

3. Excellent thermal conductivity, the wood flooring adhesive has excellent thermal conductivity, which helps save energy.

4. Comfortable foot feel, because the wood flooring adhesive has good elasticity after curing, it can not only reduce the sound of walking, but also make the foot feel more elastic and comfortable.

5. No formaldehyde and no smell. The biggest worry of using adhesive is that it will release formaldehyde and smell, but Beewin wood flooring adhesive has been certified by an authoritative testing agency, no free formaldehyde, and extremely low VOC content, almost no smell, and can be used at the maternal and child level.

6. Full adhesive paving can be used for large-scale paving of wooden floors, and there is no need to reserve expansion joints, no need to install pressure strips and marble floor tiles.

7. No primer is required, no moisture-proof mat is required, and two processes are reduced.

Requirements for full adhesive paving on the construction site:

1. Before installing the wooden floor, the ground must be leveled first. The ground must be flat, and the height difference within any two extended meters in the paving area shall not exceed 3mm;

2. The ground must be dry, and the moisture content must be controlled below 4%.

3. The ground must be firm, without sanding, cracking or even falling off;

4. The temperature in the paving area should be controlled between 5℃-25℃, and the relative humidity should be controlled between 45%-60%.

How to use wood flooring adhesive for wood floor installation?

-CONTACT US-