How to use ms polymer wood flooring adhesive?

Here are some steps on how to use MS polymer wood flooring adhesive:

1. Prepare the surface: Before applying the adhesive, make sure the surface is clean, dry, and free of any debris or dust. This will ensure a strong bond between the adhesive and the flooring material.

2. Cut the nozzle: Cut the nozzle of the adhesive cartridge at a 45-degree angle to allow for easy application of the adhesive onto the flooring material.

3. Apply the adhesive: Squeeze the adhesive onto the subfloor in a zig-zag pattern, leaving a small gap between each line of adhesive. This will allow for proper adhesion and help prevent any air bubbles from forming.

4. Press the flooring down: Once the adhesive has been applied, press the wood flooring down onto the adhesive in a firm, even manner. Make sure to apply pressure to the entire surface of the flooring to ensure a strong bond.

5. Allow time to dry: Allow the adhesive to dry according to the manufacturer's instructions before walking on the floor or moving furniture back into place. This will ensure that the adhesive has had enough time to bond properly and provide a secure installation.

6. Clean up: Use a damp cloth to wipe away any excess adhesive that may have seeped out from the edges of the flooring. This will help to create a clean and professional-looking finish to your wood flooring installation.

Overall, using MS polymer wood flooring adhesive is a straightforward process, by following these steps, you can ensure a strong and durable bond between your wood flooring and the subfloor, creating a beautiful and long-lasting installation.

How to use ms polymer wood flooring adhesive?

-CONTACT US-