What kind of sealant should be used in kitchen and bathroom?

In the process of house decoration, the bonding and sealing of kitchen and bathroom is very important, and it is also the link most prone to problems.

Compared with the use of sealant in other areas, the kitchen and bathroom not only require beautiful appearance, but also put forward higher requirements for the waterproof and mildew-proof, sealing and environmental performance of the sealant.

An excellent kitchen and bathroom sealant should have the following properties at the same time

1. Waterproof sealing

The waterproof performance is directly related to the service life of the sealant. Maintaining a dry environment at all times can effectively reduce the growth of mold.

2. Long-term anti-mildew

Due to the special use environment, sealants used in kitchens and bathrooms must have stronger anti-mildew properties to prevent colloids in hydrophilic environments from turning black and growing mold.

3. Green and environmentally friendly

Green and environmental protection is a consistent requirement for products, creating a comfortable, healthy and worry-free home environment for users.

Instructions

1. Clean the construction surface to ensure it is dry and free of oil and dust;

2. Paste protective tape on both sides of the construction surface. If the joint is too wide, fill the joint with padding material;

3. Cut the mouth of the tube and install the sealant nozzle. Cut the sealant nozzle according to the required size and extrude it with a sealant gun;

4. The sealant squeezing action should be carried out continuously so that the sealant is evenly squeezed out of the sealant injection gun nozzle in a cylindrical shape and moves evenly and slowly to ensure that the interface is filled with sealant and to prevent bubbles or voids caused by the gun nozzle moving too fast. hole;

5. Complete the trimming within 10 minutes after gluing and remove the protective tape;

6. This product reacts with moisture in the air and solidifies. It dries within 3 hours at room temperature and can form a solidified layer on the surface in 1 day. Depending on the contact area with the air and the bonding depth, it takes 1-7 days to cure to achieve the best effect. .

Precautions

1. After gluing, do not touch the surface of the sealant before the sealant is dry. Do not allow the sealant joint to deform within 1 day to avoid damaging the surface smoothness of the sealant joint;

2. Ensure that the surrounding area is well ventilated before the sealant is cured;

3. Must be placed out of reach of children;

4. Use the product as soon as possible after opening it;

5. Not suitable for places where the temperature is above 80℃ for a long time or where it is continuously immersed in water;

6. Not suitable for loose or weak surfaces;

7. Do not let uncured products come into contact with your eyes. If you come into contact accidentally, please wash it with plenty of water and seek medical treatment in time.